KLEIBERIT 501.0 is a moisture-curable polyurethane adhesive for bonding porous and non-porous materials where extreme bonding strength and resistance to harsh environmental conditions are required. The 25* minute open time of this adhesive will allow you to accurately bond even complex, time-consuming and meticulous adhesive products. Minimum pressing time 60* minutes.\n\nUse: \n\nWear gloves when using adhesive. The adhesive can be applied directly from the bottle and, if necessary, spread with a notched trowel or brush. Close the bottle tightly immediately after use, this will preserve the adhesive longer. The adhesive is applied to one of the surfaces to be bonded and the materials are strongly compressed ensuring good contact and a thin adhesive joint. You have up to 25* minutes to apply the glue before pressing the parts. Minimum pressing time when gluing straight materials is 60* minutes. The adhesive expands as it hardens. Hardened glue is easy to process and sand. Maskimalus suklijaavimo stiprumas ir Resistance pasiekiamas po 7 parų.\n\nOperating temperature:\n\nIdeal +20°C, do not work below +5°C\n\nCleaning: \n\nUncured adhesive and tools can be cleaned with a cleaner KLEIBERIT 820.0. Hardened adhesive can be softened with a cleaner KLEIBERIT 822.5\n\n\n\n\n\n